Convergent Design Odyssey7Q Setup Manual page 12

Configure Odyssey7Q 4K RAW to HD Recording
4
Format SSDs
MENU » ODYSSEY » SSD'S » FORMAT BOTH
second SSD drive installed.)
5
Connect to Camera and Verify Status Input
Connect FS700 3G-SDI output to Odyssey7Q SDIA input
Note: Use only 3G-SDI rated cables from FS700 to Odyssey 7Q. Using a 1.5G
SDI cable in not recommended and may cause issues.
The status on your Odyssey7Q will display your camera's output.
Example:
Note: The recorded file will be 1920x1080 @ 23.98/25/29.97 fps.
© 2014 Convergent Design, Inc. - All Rights Reserved.
4K 29.97p 4K->HD
S-LOG2 PRORES
(or FORMAT SSD1 if you do not have a
12