Using Your Remote Control; Power On And Standby; Power On The Tv; Put The Tv To Standby Mode - BenQ SJ4231 User Manual

Using your remote control

Power on and standby

Make sure that the TV power cable has been plugged into a wall
power outlet, and the outlet has been switched on (if there is a
switch).

Power on the TV

When TV is plugged into a outlet, the power indicator will light
up amber, which indicates the TV is in standby mode. Press
Power/standby
turn on with the power indicator light turning into blue.

Put the TV to standby mode

Press Power/standby
will enter into the standby mode with the power indicator light
turning into amber.

Switch inputs

1. Press
▲▼
2. Press
display the selected input.
• DVI can be selected only when a DVI digital video signal source has
already been connected to the HDMI input.
• When the selected input is Video or PC input, you can toggle
between the current input and previous selected one by pressing the
Recall button on your remote control.

Adjust the audio settings

Adjust the volume

• Press VOL + on the TV, or
the volume. An volume bar will be shown on your screen and
increased in its length as you raise the volume.
-
• Press VOL on the TV, or
the volume. An volume bar will be shown on your screen and
decreased in its length as you lower the volume.
once on the remote control, and the TV will
again on the remote control, and the TV
Input under remote control.
or ◄ ► on the remote control to select and
+ on the remote control to raise
- on the remote control to lower
Using your remote control 20