Switch Two Program; Add/Delete A Program - BenQ SJ4231 User Manual

2. Press the red button on your remote control to move the
highlight to "Name".
3. Press ▲▼ to select desired characters and ◄► to move the
highlight to spell the name.
4. Press the red button on your remote control to confirm the
name.
5. Press MENU to close the menu.

Switch two program

1. In the program menu, press▼ or ▲ to select "program Edit",
and press ►. This will open the program edit menu.
2. Move the hightlight bar to the program that you want to
replace, and press the green button on your remote control to
confirm the selection.
3. Then, move the highligh to the program that you want to
replace with, and press the green button on your remote
control to replace the previous selected program.
4. Press MENU to close the menu.

Add/delete a program

1. In the program menu, press▼ or ▲ to select "program Edit",
and press ►. This will open the program edit menu.
2. Move the hightlight bar to the program that you want to add or
delete.
3. Press
4. Confirm the above action, and press MENU to close the menu.
39
OSD menu
on the remote control to add or delete the program.