Using The Teletext Function - BenQ SJ4231 User Manual

4:3
Cinema
The available options may vary with input sources.
When in YPbPr or HDMI source, and the Timing is 720p or above, the wide-
screen is not supported.

Using the Teletext function

TEXT on the remote control to dispaly Teletext, and again
Press
to turn it off.
Teletext is only available when ATV is selected as the input source,
and a signal which transmits Teletext is currently displayed. Not
all TV stations and video signals broadcast Teletext. If in doubt,
please contact the TV station.
When Teletext displays on-screen, you can:
Mode to cycle between Teletext only and superimposed on
Press
the video image.
Aspect/ Teletext size to enlarge Teletext size. Press it
Press /
again to resume normal size.
Freeze/ Teletext freeze to freeze Teletext message. Press
Press /
it again to restore normal update.
index to go to the Teletext index page.
Press
Reveal to display any concealed Teletext information if
Press
available(for example, the answer to a quiz).
Subpage to view the subpages when provided.
Press
Sleep/blue,
Press
or ▼
Press▲
move between subpages when selected.
Resizes the image to 4:3 aspect
proportions. Recommended
for use when viewing video
sources which are already in 4:3
aspect such as analog TV and
PC video input.
Stretches a 4:3 image to the
width of a 16:9 aspect image
proportions.recommended for
use in filling the screen with a
4:3 aspect image.
Preset/yellow.
to go to the previous or next Teletext page, or to
Using your remote control 24