Watch The Tv Channels - BenQ SJ4231 User Manual

7. Watch the TV channels

This LCD TV has been designed to provide high resolution
display.To obtain the best display quality, connecting to a digital
signal source is recommended. In this case, you shall set the
output resoultion of the source to match your TV resolution,
and select a proper aspect ratio, such as "4:3" or "WIDE" when
you are watching traditional (analog) programs. For more detaild
information regarding the aspect ratio and how to set it, please
refer to the second part of this manual.
9
Part I: Quick Start Guide
After tunning and saving the TV channels,
you can watch the TV channels by following:
• Press the ▲ or ▼ button (as highlighted in
Fig. left) on the remote control, or the ▲ CH
(Channel) or CH ▼ (Channel) button on the
TV to select the channel you want to watch.
• Also can enter the channel number to select
the channel directly. In this case you will use
the ten-keys on your remote control to enter
the number. For example, just press
select channel 8.
• If want to enter a double-digit channel number,
first press the Channel Entry button, then
press the corresponding ten-keys buttons,
such as and
28.
• The remote controll also provide you a
shortcut to return to the previous channel. Just
press the return
Fig. left), and the channel will be switched to
the previous one.
•
Press the
controller, or the + VOL or VOL - button on
the TV to adjust the volume. In this case, a
volume indicator will be shown on the screen.
For more informaion about this TV and its
setup, please refer to the second part of this
manual, "USER GUIDE".
to select the channel
button (as highlighted in
+ or - button on the
to