Mounting; Orientation; Rigging - Chauvet ColorAdo 2 Tour User Manual

Setup

Mounting

Orientation

Rigging

Procedure
Product
Mounting
Diagram
COLORado™ 2 Tour User Manual Rev. 01e
Read the safety notes at the beginning of this guide and follow their recommendations
before mounting this product.
Always mount this fixture in any safe position while making sure that there is adequate
room around it for ventilation.
Make sure to mount this fixture away from any flammable material as indicated in the
Safety Notes.
CHAUVET® recommends following the general guidelines below when mounting the
COLORado™ 2 Tour.
· When selecting an installation location, consider ease of access to the fixture for
operation, programming adjustments and routine maintenance.
· Never mount the fixture in places where rain, high humidity, extreme temperature
changes or restricted ventilation may affect it.
· Make sure that the location where you are mounting the fixture can support its
weight. Please see the Technical Specifications section of this manual for the weight
requirement of this fixture.
This fixture includes a mounting yoke to which you can attach one or two rigging
clamps. You must supply your own "C" or "O" clamps and make sure that they are
capable of supporting the weight of this fixture. CHAUVET® recommends using at least
two mounting points per fixture.
Floor Mount
-8-
Clamp (not provided)
Hanging
December 11, 2009