Table of Contents
Advertisement
Before you Begin
Safety Notes
Personal
Safety
Mounting
and Rigging
Power and
Wiring
Operation
Expected LED
Lifespan
COLORado™ 2 Tour User Manual Rev. 01e
Please read the following notes carefully because they include important safety
information about the installation, usage and maintenance of this product.
It is important to read all these notes before starting to work with this product.
There are no user serviceable parts inside the COLORado™ 2 Tour. Any
reference to servicing this unit you may find from now on in this User Manual
will only apply to properly CHAUVET® certified technicians. Do not open the
housing or attempt any repairs unless you are one of them.
Please refer to all applicable local codes and regulations for proper installation
of the COLORado™ 2 Tour.
Keep this manual for future consultation. If you sell the COLORado™ 2 Tour to
another user, make sure that they also receive this manual.
· Avoid direct eye exposure to the light source(s) while they are on.
· Always disconnect the COLORado™ 2 Tour from its power source before
servicing.
· Always connect the COLORado™ 2 Tour to a grounded circuit to avoid the risk of
electrocution.
· Do not touch the COLORado™ 2 Tour's housing when operating because it may
be very hot.
· This product is for indoor use only! To prevent risk of fire or shock, do not expose
this product to rain or moisture.
· Make sure there are no flammable materials close to the fixture(s) while operating.
· When hanging this fixture, always secure it to a fastening device using a safety
chain (not provided).
· Always make sure that you are connecting the COLORado™ 2 Tour to the proper
voltage, as per the specifications in this manual or on the product's sticker.
· Never connect the COLORado™ 2 Tour to a dimmer pack.
· Make sure the controller's external voltage adapter housing or cable is not cracked,
crimped or damaged.
· Never disconnect the fixture by pulling or tugging on the power cable.
· Maximum ambient temperature (Ta) is 104° F (40° C). Do not operate the fixture at
a higher temperature.
· In case of a serious operating problem, stop using this product immediately!
In the unlikely event that your COLORado™ 2 Tour may require service, please
contact CHAUVET® Technical Support.
LEDs gradually decline in brightness over time, mostly because of heat. Packaged in
clusters, LEDs exhibit higher operating temperatures than in ideal or singular optimum
conditions. For this reason, using all color LEDs at their fullest intensity significantly
reduces the LEDs' lifespan. Under normal conditions, this lifespan can be of 40,000 to
50,000 hours. If extending this lifespan expectancy is vital, lower the operational
temperature by improving ventilation and reducing the external temperature, as well
as limiting the overall projection intensity
-2-
December 11, 2009
Advertisement
Table of Contents
