Table of Contents
Advertisement
Device information
When users insert the Micro SD/SDHC card, the card information such as the memory capacity and
status will be shown at Device Information section.
When the memory card is successfully installed, the memory card status shall be shown at <Device
information> section in the Storage Management page.
Device setting
Click on the <Format> button to format the memory card.
Disk cleanup setting
Users can enable automatic recordings cleanup by specifying the time and storage limits.
Recording List
Each video file on the Micro SD/SDHC card will be listed in the Recording list. The maximum file size is
60 MB/per file.
When the recording mode is set as <Always> (consecutive recording) and the Micro SD/ SDHC card
recording is also allowed to be enabled by events triggered, once events occur, the system will
immediately implement events recording to the memory card. Then the IP Camera will return to the
regular recording mode after events recording.
•
Remove
To remove a file, select the file first, and then click on the <Remove> button.
•
Sort
Click on the <Sort> button, and the files in the Recording list will be listed in name and date order.
The capital letter A/M/R appears in the very beginning of name denotes the sort of the
recording: A stands for Alarm; M stands for Motion; R stands for regular recording.
Note
•
Download
To open/download a video clip, select the file first, and then click on the <download> button below the
Recording list field. The selected file window will pop up. Click on the AVI file to directly play the video in
the player or download it to a specified location
4.3.12 Recording (Local Recording)
The Recording setting can be found under this path: System> Recording.
.
- 68 -
Advertisement
Table of Contents
