2.4 Dome Camera Setups
Before connecting the IP Camera to other devices of IP Surveillance system, please complete the IP
Camera's ID and communication switch settings. These switches are located on the bottom of the IP Camera.
2.4.1 Switch/Connector Definition
DO NOT change the Speed Dome IP Camera's Communication Switch factory default
settings.
Note
2.4.2 Communication Switch Setting
Communication Switch
Please do not change the default setting without qualified specialist or supplier's notice.
2.5 Power & Audio Connector Definition
Please refer to the illustrations below to connect power core through the supplied power adaptor, and set up
the audio according to the Audio pin definition.
Item
A
B
C
D
E
F
SW
Description
DSS (Digital slow shutter)
SW 1
Reserved
SW 2
Reserved
SW 3
Reserved
SW 4
Default PTZ setting, not include IP card
SW 5
Disable pan/tile
SW 6
- 18 -
Description
RJ-45 Connector
ALARM I/O
Power
Micro SD Card Slot
Factory Reset Button
Audio I/O
Default
ON
OFF
OFF
OFF
OFF
OFF