Start time / Finish
Setting the start and finish times
You can delay the start of a cooking process. The appliance
will then switch on automatically.
This is not possible when using the "Descale" function.
Use "Start at" to enter the time of day at which you want the
programme to start. Use "Finish at" to enter the time of day at
which you want the programme to end.
The difference between the start time and finish time is the
cooking duration selected, plus the heating-up time which the
appliance calculates.
This function cannot be used if the oven interior is too hot,
e.g at the end of a cooking process. "Start at" / "Finish at"
will not be displayed in this case.
Leave the door open to cool down the appliance.
Cooking results can be impaired if there is a long delay
between the food being placed in the oven and the start of
cooking.
Fresh food can change its colour and even deteriorate.
^ Select the function, temperature and duration in the normal
way.
^ Touch X.
^ Select " Start at " or " Finish at ".
^ Set the time of day at which the cooking process should
start or finish.
^ Confirm with OK.
Additional functions
37