Connecting The Ethernet Cable; Connecting Sun Storedge 6960 Or 6960Sl Storage System Expansion Cabinet; Table 3-2 Sun Storedge 3960 Storage System Expansion Cabinet Connections - Sun Microsystems StorEdge 3900 Installation Manual

TABLE 3-2
Cable Label
t3be4(a)
t3be4(m)
t3be3(a)
t3be3(m)
t3be2(a)
t3be2(m)
t3be1(a)
t3be1(m)
t3be0(a)
t3be0(m)
3.1.2

Connecting the Ethernet Cable

In a two-cabinet configuration, the Ethernet hubs in both cabinets must be
interconnected. The 10-meter, shielded, Ethernet crossover cable connects into either
port 12 or 24 of the hub in the base cabinet. The MDI switch on the hub in the base
cabinet is set to the In position. The other end of the 10-meter, shielded, Ethernet
crossover cable connects into either port 12 or 24 of the Ethernet hub in the
expansion cabinet. The MDI switch is set to the In position on that hub as well.
See
FIGURE 8-3
3.2 Connecting Sun StorEdge 6960 or 6960SL
Storage System Expansion Cabinet
If you purchased a Sun StorEdge 6960 or 6960SL storage system with the expansion
cabinet, the following instructions describe how to connect the expansion cabinet.
3-4 Sun StorEdge 3900 and 6900 Series 2.0 Installation Guide • March 2003
Sun StorEdge 3960 Storage System Expansion Cabinet Connections
Switch and Switch
Connection
sw1b (P16)
sw1a (P16)
sw1b (P13)
sw1a (P13)
sw1b (P15)
sw1a (P15)
sw1b (P11)
sw1a (P11)
sw1b (P9)
sw1a (P9)
for the diagram of this cabling.