Mic/Mute Button - Toshiba DP5000-series Quick Reference Manual

To hold a conference call
If you are the "master" conference controller, press
once (or twice for Executive Hold) to place the conference
call on hold.
The conference continues and you can join at any time
without giving up "master" abilities. Music-on-hold is
suppressed in this mode.
To conference two outside Lines
1. While talking on an outside call, press
2. Access an outside line.
3. After the party answers, press
Note
answer, press the flashing line button to return to the original call.
Hold
1. To place a call on Hold, press the
2. To return to the held call, press the held line's button.
If you do not return to the held call, it rings back to your phone.
If you are busy on another call, you hear two tone bursts. If the
held party hangs up, the call is released.
To place a call on Exclusive Hold
While on a call, press
Exclusive Hold; no one else will be able to access that line.
To place a call on Automatic Hold
While on a call, press another extension button to receive/
originate a new call. You can switch between calls without
having to press
Make sure this feature is programmed on your system; if not,
existing calls will drop.

Mic/Mute Button

Mute on the DP5000-series telephones mutes not only the microphone
but also the handset microphone as well. The MIC button on the
telephones toggles between Mic and Mute. When Mic button is lit,
handsfree communication is supported, when
is off, Mute is enabled.
During a handsfree conversation, press the Mic key, the red
indicator will turn off; the microphone and handset are
muted.
Press the Mic key again to resume hands free communication,
the red indicator will turn on.
8
Strata CIX DP5000-series Telephone Quick Reference Guide 11/07
If you receive a busy tone or if the station does not
Hold
Cnf/Trn
Hold
Hold
twice. This places the call on
.
Cnf/Trn
.
twice and hang up.
button.
Mic
is pressed and light
Hold