Cleaning Monorail Top - Concept2 D User Manual

MAINTENANCE
Recommended Maintenance Schedule
Daily:
Wipe monorail with a cloth or non-abrasive scouring
pad after use. See page 30.
Every 50 hours of use
(weekly for institutional users):
Clean and lubricate the chain with the oil provided
(or 20w Motor Oil or 20w 3-in-1 oil). See page 31.
Every 250 hours of use
(monthly for institutional users):

CLEANING MONORAIL TOP

Clean daily after use
Tools Needed:
Cloth
Cleaner
LUBRICATING CHAIN
Every 50 Hours of Use
Use 1 teaspoon of 20 weight oil.
Wipe off excess.
Repeat if needed.
SHOCK CORD ADJUSTMENT
You must use the shock cord available through Concept2. Use of other shock cords will have a significant effect on the performance of your machine.
1 .
1) Inspect chain for stiff links. If thorough lubrication
does not help, the chain should be replaced.
2) Inspect chain-handle connection for wear. If the
hole has become elongated, or the U-bolt is worn
halfway through, the entire connection should be
replaced.
3) Tighten the shock cord if the handle does not
return all the way to the fan enclosure.
4) Check the socket screws used to install the front
leg for tightness.
Mineral Acids
Bleach
Coarse Abrasives
2
5) Loosen or tighten the nuts on the Performance
Monitor arm joints as necessary.
6) Check for dust inside flywheel with flashlight.
Vacuum if needed. See page 34.
IMPORTANT: The monitor is a sealed
unit. Do not take apart. Any attempt to
disassemble will void warranty. Contact
Concept2 for problems with this part.
rowing with too high a force increases
the risk of injury.
3 .
2x