Concept2 DYNAMIC Quick Start Manual

INSTALLING THE POLAR HEART RATE RECEIVER
ON THE DYNAMIC INDOOR ROWER
Materials Needed
• 2 Heart Rate (HR) Cables (identical)
• 5 J-clips
• 1 Polar Receiver with Velcro Patch
• 1 Installation Leader Tape
Procedure
J-clip
J-clip
1. Plug first HR cable into the bottom of the performance
monitor as shown. See image A.
2. Remove adhesive backing from four (4) J-clips and
position as shown in images A and B.
Thread first HR cable through the J-clips and plug into
second HR cable to make one long cable. If needed,
tape the connection point to ensure the HR cables
stay connected.
Procedure Overview
• Plug one HR cable into performance monitor
• Adhere J-clips to Dynamic Indoor Rower
• Connect the two HR cables
• Feed HR cable through rail assembly
• Attach Polar receiver to underside of rail assembly and
plug into HR cable
J-clip
J-clip
concept2.com
Heart Rate Cable
HR Receiver
B.
A.
Monitor Pickup Cable
J-clips
0311