Concept2 D Quick Start Manual

Reboxing indoor rower

Hide thumbs Also See for D:

REBOXING MODEL D INDOOR ROWER

Applies to all Model Ds built after July 31, 2006.

Remove and disassemble the front legs. Note: if your machine was manufactured

between June 10, 2016 and the present, please see page 2.

concept2.com | 800.245.5676

6 lobe driver, packing tape

TOOLS NEEDED:

Flywheel foam block #1

Foot support

foam block #2

Front end and Monorail assemblies

nested together

Front foot assembly

Front legs

Cross foam block #4

Foot support foam block #3

0317

Table of Contents

Need help?

Do you have a question about the D and is the answer not in the manual?

Page 1 REBOXING MODEL D INDOOR ROWER Applies to all Model Ds built after July 31, 2006. 6 lobe driver, packing tape TOOLS NEEDED: Remove and disassemble the front legs. Note: if your machine was manufactured between June 10, 2016 and the present, please see page 2.
Page 2 Seat the 6-lobe driver in the head of the screw and apply firm downward pressure, while turning with the other driver to loosen the screw. If you need further assistance, please call Concept2 at 800.245.5676 (US and Canada), or email rowing@concept2.com. concept2.com | 800.245.5676...