Using Caller Id; Blocking Junk Faxes - Lexmark 8300 Series User Manual

3
Press or repeatedly until Ringing and Answering is highlighted.
4
Press .
5
Press or repeatedly until Forward appears.
6
Press .
7
Enter the number to which you want to forward the fax.
8
Press .
9
Press to save the setting and exit the menu.

Using Caller ID

Caller ID is a service provided by some telephone companies that identifies the telephone number (and
possibly the name) of the person who is calling. If you subscribe to this service, it works with the printer.
When you receive a fax, the telephone number of the person who is sending you the fax appears on the
display.
Note: Caller ID is available only in some countries and regions.

Blocking junk faxes

1
From the control panel, press Fax Mode.
2
Press .
3
Press or repeatedly until Junk Fax Blocking is highlighted.
4
Press .
5
Press or repeatedly until On appears.
6
Press or repeatedly until Add Number to Block is highlighted.
7
Press .
8
Use the keypad buttons to enter a name, and then press
9
Press to save this entry.
10
Press or repeatedly until View Block List is highlighted, and then press
your entry.
to enter the corresponding fax number.
86
to check or edit