Power Button Is Not Lit; Software Does Not Install - Lexmark 8300 Series User Manual

Power button is not lit

1
Disconnect the power supply cord from the wall outlet, and then from the printer.
2
Plug the cord all the way into the power supply port on the printer.
3
Plug the cord into an electrical outlet that other electrical devices have been using.
4
If the Power button light is not on, press Power.

Software does not install

The following operating systems are supported:
•
Windows 98/Me
•
Windows 2000
•
Windows XP
If the software does not launch automatically when you insert the CD:
1
Close all open software applications.
2
Disable any anti-virus programs.
3
Double-click the My Computer icon.
In Windows XP, click Start to access the My Computer icon.
4
Double-click the CD–ROM drive icon.
5
If necessary, double-click setup.exe.
6
Follow the instructions on the computer screen to install the software.
1
Check the USB cable for any obvious damage.
2
Firmly plug the rectangular end of the USB cable into the USB port of the computer.
The USB port is marked with the
3
Firmly plug the square end of the USB cable into the back of the printer.
1 2
USB symbol.
102