Partial Document Or Photo Prints; Copy Troubleshooting; Copier Does Not Respond; Scanner Unit Does Not Close - Lexmark 8300 Series User Manual

1
From the software application, click File
2
Click Properties, Options, Setup, or Preferences.
3
Click Quality/Copies.
4
From the Quality/Speed area, select a lower print quality.

Partial document or photo prints

Make sure the document or photo is loaded correctly on the scanner glass.
Make sure the paper size being used matches the size you selected.

Copy troubleshooting

•
"Copier does not respond" on page 107
•
"Scanner unit does not close" on page 107
•
"Poor copy quality" on page 108
•
"Partial document or photo copies" on page 108

Copier does not respond

If the Power button light is not on, see "Power button is not lit" on page 102.
If an error message is displayed, see "Error messages" on page 121.
Make sure the printer is set as the default printer and is not on hold or paused.
1
Click Start Control Panel
or
Click Start Settings
2
Double-click the name of your printer.
3
Click Printer.
•
Make sure no check mark appears next to Pause Printing.
•
Make sure a check mark does appear next to Set As Default.
If none of the previous options fixes the problem, uninstall the printer software, and reinstall it. For more
information, see "Removing and reinstalling the software" on page 125.

Scanner unit does not close

1
Lift the scanner unit.
2
Remove any obstruction keeping the scanner unit open.
3
Lower the scanner unit.
Print.
Printers and Other Hardware
Printers and Faxes (or Printers).
107
Printers and Faxes.