Printer Does Not Feed Paper, Envelopes, Or Specialty Media; Banner Paper Jams - Lexmark 8300 Series User Manual

Lexmark user's guide printer 8300 series
Hide thumbs Also See for 8300 Series:
Table of Contents

Advertisement

Adjust the paper guides:
When using media less than 8.5 inches wide
Against the edges of the paper or media, making sure it does not buckle

Printer does not feed paper, envelopes, or specialty media

If there is a paper jam, see the appropriate paper jam section.
Verify that the specialty media is loaded correctly.
Try loading one page, envelope, or sheet of specialty media at a time.
Make sure the printer is set as the default printer and is not on hold or paused.
1
Click Start
Control Panel
or
Click Start
Settings
2
Double-click the name of your printer.
3
Click Printer.
Make sure no check mark appears next to Pause Printing.
Make sure a check mark does appear next to Set As Default.

Banner paper jams

1
Press Power to turn off the printer.
2
Remove the jammed banner paper from the printer.
To keep a banner print job from jamming:
Use only the number of sheets needed for the banner.
Select the following settings to enable the printer to feed paper continuously without jamming:
1
With a document open, click File
2
Click Properties, Options, Setup, or Preferences.
Printers and Other Hardware
Printers and Faxes (or Printers).
Print.
119
Printers and Faxes.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents