Paper Jam In The Adf; Paper Or Specialty Media Misfeeds - Lexmark 8300 Series User Manual

3
Close the rear door.
4
Press .
If the paper is accessible from the front of the printer:
1
Raise the paper exit tray.
2
Firmly grasp the paper, and gently pull it out.
3
Lower the paper exit tray.
4
Press .

Paper jam in the ADF

1
Open the ADF.
2
Firmly grasp the paper, and gently pull it out.
3
Close the ADF.
4
Press .

Paper or specialty media misfeeds

If paper or specialty media misfeeds or skews, or multiple sheets feed or stick together, try the following
solutions.
Load a smaller amount of paper into the printer.
See "Loading various paper types" on page 44 for information about:
•
Maximum loading amounts per paper type
•
Specific loading instructions for supported paper and specialty media
Load paper with the print side facing down.
Remove each page as it exits, and let it dry completely before stacking.
Use only new, unwrinkled paper.
118