Lexmark 8300 Series User Manual page 45

Load up to
25 sheets of labels
50 transparencies
100 sheets of custom size paper
Make sure
•
You use full label sheets. Partial sheets (with areas exposed
by missing labels) may cause labels to peel off during
printing, resulting in a paper jam.
•
The print side of the labels faces down.
•
The top of the labels feeds into the printer first.
•
The paper guides rest against the left, right, and bottom
edges of the label sheets.
•
The rough side of the transparencies faces down.
•
You remove any paper backing sheets from the
transparencies before loading.
•
If the transparencies have a removable strip, each strip faces
down toward the paper tray.
•
The paper guides rest against the left, right, and bottom
edges of the transparencies.
Note: Transparencies require more drying time. Remove each
transparency as it exits, and allow it to dry to avoid ink smudging.
•
The print side of the paper faces down.
•
The paper size fits within these dimensions:
Width:
–
76–216 mm
–
3.0–8.5 inches
Length:
–
127–432 mm
–
5.0–17.0 inches
•
The paper guides rest against the left, right, and bottom
edges of the paper.
45