Chapter 4 Connecting The Scanner; Connecting The Scanner To The Computer - Canon imageFORMULA P-215II User Manual

Chapter 4 Connecting the Scanner

Connect the scanner to the computer and power outlet.

Connecting the Scanner to the Computer........................................ 24

Turning the Power ON ........................................................................ 25
Downloaded from ManualsPrinter.com Manuals
Connecting the Scanner to the Computer
Connect the scanner to the computer.
Connecting the Scanner to the Computer
Turn OFF the Auto Start switch on the rear of the scanner, and use the
supplied USB cable to connect the scanner to the computer.
• Take care not to disconnect the USB cable while data is being
transferred between the scanner and computer during scanning.
• The USB connector to which the scanner is connected on your computer
must be one capable of supplying 500 mA / 5 V of power.
• Do not connect the scanner to the computer before installing the
software.
When connected to a USB port that supports USB 3.0, the scanner
operates on 900 mA bus power and is capable of high-speed
scanning. Using the power supply cable in such cases will not
increase the scanning speed.
Although this scanner supports USB 3.0 bus power, USB data
transfer rates remain at USB 2.0 speeds.
Using a USB Hub
The scanner cannot be used when it is connected to a computer via a bus-
powered USB hub. A self-powered USB hub can be used, but operation is
not guaranteed.
24