Chapter 4 Connecting The Scanner; Connecting The Scanner To The Computer - Canon imageFORMULA P-208 User Manual

Chapter 4 Connecting the Scanner

Connect the scanner to the computer and power outlet.

Connecting the Scanner to the Computer........................................ 21

Turning the Power ON........................................................................ 22
21
Connecting the Scanner to the Computer
Connect the scanner to the computer.
Connecting the Scanner to the Computer
Turn OFF the Auto Start switch on the rear of the scanner, and use the
supplied USB cable to connect the scanner to the computer.
• Take care not to disconnect the USB cable while data is being
transferred between the scanner and computer during scanning.
• The USB connector to which the scanner is connected on your computer
must be one capable of supplying 500 mA / 5 V of power.
• Do not connect the scanner to the computer before installing the
software.
Using a USB Hub
The scanner cannot be used when it is connected to a computer via a
bus-powered USB hub. A self-powered USB hub can be used, but
operation is not guaranteed.