Starting And Exiting Captureontouch Lite - Canon imageFORMULA P-215II User Manual

Starting and Exiting CaptureOnTouch Lite

Once you start CaptureOnTouch Lite it remains present in the
system.
When the Auto Start switch on the rear of the scanner is not in the
ON position, CaptureOnTouch Lite will not start. For details, refer to
"Connecting the Scanner to the Computer"
Double-click (CaptureOnTouch icon) in the taskbar to start
CaptureOnTouch and display the main window.
To close the CaptureOnTouch Lite window, click
window. This closes the window, but CaptureOnTouch Lite will continue to
reside in the system.
Click (CaptureOnTouch icon) in the menu bar and then click [Launch
CaptureOnTouch] from the menu which appears to start CaptureOnTouch
and display the main window.
To close the CaptureOnTouch Lite window, click
window. This closes the window, but CaptureOnTouch Lite will continue to
reside in the system.
To quit the residence of the CaptureOnTouch application
Downloaded from ManualsPrinter.com Manuals
1
Click
menu select [Exit].
CaptureOnTouch is no longer resident in the system and the icon
disappears from the taskbar.
2
Close the feed tray.
at the top of the
The scanner turns OFF.
3
at the top of the
1
Click
[Exit] from the menu.
37
(CaptureOnTouch Lite icon) in the taskbar, and then from
Disconnect the USB cable from the scanner and computer.
(CaptureOnTouch Lite icon) in the menu bar, and select