Connecting The Scanner To Your Pc - Canon imageFORMULA DR-3060 Startup Manual

Connecting the Scanner to Your PC

Connect the DR-3060/3080C either directly to your PC or to a SCSI device
daisy chain.
Notes on the Shape of the Connector and the SCSI Interface Cable
• The DR-3060/3080C is equipped with a 50-pin half-pitch (pin type)
SCSI connector.
• After checking the shape of the SCSI connector on your PC or on the
SCSI device to which you will daisy chain the scanner, purchase a SCSI
interface cable with the right combination of the appropriate connectors.
Computer
Notice
Make sure that the scanner and your PC are both turned off when connecting
the scanner to the PC.
DR-3060/3080C
SCSI device
SCSI interface cable
50-pin half-pitch
(pin type)
Installing the Scanner
15