Starting And Exiting Captureontouch - Canon imageFORMULA P-215II User Manual

Turn OFF the Auto Start switch on the rear of the scanner, and use the
supplied USB cable to connect the scanner to the computer. For details,
see Connecting the Scanner to the Computer24.
CaptureOnTouch supports the following scanning methods.
Standard Scanning
Click the Select document and Output panels, and then click the [Scan]
button to scan the document. You can select the scan method according
to the document type and purpose of use before scanning.
-> "Standard Scanning"
Scanning Shortcut
You can register in advance combinations of frequently-used document
selections and output methods as a "Scanning Shortcut". Just click the
Scanning shortcut panel to implement the scan.
-> "Scanning Shortcut"
Start button
"Scanning shortcuts" are allocated to the scanner start button in advance.
Set the document and press the Start button to start the scan. You can
also allocate your own shortcuts to the start button.
-> "Scanning with Start Button"
Downloaded from ManualsPrinter.com Manuals

Starting and Exiting CaptureOnTouch

By default, CaptureOnTouch becomes resident in the system when
you start your computer.
Double-click (CaptureOnTouch icon) in the taskbar to start
CaptureOnTouch and display the main window.

You can also start CaptureOnTouch from the Start menu. Click
[Start] - [All Programs] - [Canon P-xxx] - [P-xxx
CaptureOnTouch].

The interval between the time you press the Start button on the
scanner and the time scanning begins is shortened when the
[Make CaptureOnTouch resident] check box is selected in the
[Basic settings] tab of the [Environmental settings] dialog box.
For details, see Environmental Settings65.
Click (CaptureOnTouch icon) in the menu bar and then click [Launch
CaptureOnTouch] from the menu which appears to start CaptureOnTouch
and display the main window.
47