Ac Adapter (Sold Separately); Moving The Scanner; Handling - Canon imageFORMULA P-215II User Manual

AC Adapter (Sold Separately)


AC Adapter (Sold Separately)Do not use AC adapters other than the
one specified (sold separately) for this scanner. Do not use the AC
adapter designed for this scanner with any other device.

If you want to enable high-speed scanning with a USB 2.0 connection
using only one USB cable, purchase an AC adapter (sold separately).

If you have any questions regarding the power supply, contact your
local authorized Canon dealer or service representative for further
information.

Moving the Scanner


When moving the scanner, always hold it with both hands to avoid
dropping it.

Make sure to disconnect any USB cables and AC adapters (sold
separately) and when moving the scanner. If the scanner is carried
with these items connected, the plugs and connectors may be
damaged or cause the scanner to fall and result in personal injury or
damage to the scanner.
Downloaded from ManualsPrinter.com Manuals

Handling

Note the following precautions whenever using the scanner. Failure
to do so may result in a fire or electric shock.

Never place alcohol, benzene, paint thinner, or other flammable
substances near the scanner.

Do not allow water or flammable substances (alcohol, benzene, paint
thinner, etc.) to spill inside the scanner, as this may result in a fire or
electric shock.

Do not cut, damage, or modify the USB cable or power supply USB
cable. Do not place heavy objects on the cable, and do not pull or
excessively bend the cable.

Never connect the USB cable or power supply USB cable when your
hands are wet.

Do not knot or coil the USB cable or power supply USB cable, as this
may result in a fire or electric shock.When connecting the cable,
make sure that the power plug is securely and completely inserted
into the power connector.

Use only the USB cable or power supply USB cable supplied with the
scanner.

Do not attempt to dismantle the scanner or modify it in any way, as
this is dangerous and may result in a fire or electric shock.

Do not use flammable aerosol spray products near the scanner.

When cleaning the scanner, turn the scanner OFF and disconnect the
USB cable or power supply USB cable.

When disconnecting the USB cable, grasp it firmly by its connector.
Do not pull directly on the USB cable, as this may damage or expose
the cable's internal wiring, resulting in a fire or electric shock.

Clean the scanner using a slightly dampened cloth that has been well
wrung out. Never use alcohol, benzene, paint thinner, or any other
flammable substance.

If the scanner makes strange noises, or gives off smoke, heat, or
strange odors, or the scanner does not function or other
abnormalities occur when you use the scanner, immediately close the
feed tray, turn the scanner OFF, and disconnect the USB cable or
14