Connecting The Scanner To A Computer - Canon imageFORMULA CR-135i II Instructions Manual

Connecting the Scanner to a Computer

Connect the CR-135i II/CR-190i II to a computer as follows. Make sure
to install the software before connecting the scanner to a computer.
• If you connect the computer and turn ON the CR-135i II/CR-190i II
before installing the software, the following wizard screen appears. If
this happens, click [Cancel], turn OFF the CR-135i II/CR-190i II, and
then install the software.
The following wizard screen is an example in Windows Vista. When a
similar wizard screen appears in Windows XP/7/8/8.1/10, click
[Cancel].
Wizard Screen (Windows Vista)
2
A
Install the software
Install the Scanning Utility for CR-135i/CR-190i in the setup disc
provided with the CR-135i II/CR-190i II. (See "Installing the
Software," on p. 19.)
B
Connect the scanner to a computer
Connect the CR-135i II/CR-190i II and the computer with a USB.
(See "Connecting the Scanner to a Computer," on p. 20.)
C
Turn ON the power
Turn ON the power of the CR-135i II/CR-190i II. (See "Turning ON
the Power," on p. 21.)
D
Automatically installing the device driver
The device driver is installed automatically when Windows
recognizes the CR-135i II/CR-190i II as new hardware. (See
p. 22.)