Scanning Shortcut - Canon imageFORMULA P-215II User Manual

5
To check the scanned image, click the [Finish] button.
To edit scan images, see Operations for the scanned image edit window56.
Click the [ ] button to edit the output settings. -> "Setting the output"
Click the [Cancel] button to discard the scanned image and return to the main
window.
When the output has finished, a popup window will be displayed. If saving
the scanned image, a link to open the save destination folder will be
displayed.
This completes the Standard Scanning.
If you click [Open storage folder], the folder in which the saved
scanned images were saved opens. Depending on the output
settings, the [Open storage folder] button may not be displayed.
Downloaded from ManualsPrinter.com Manuals

Scanning Shortcut

Operations;
Save [Scanning Shortcut] -> Scan the document -> Output the
scanned images
By adding scanning shortcuts that combine frequently-used document
selections and outputs, you can scan just by clicking the Scanning
Shortcut panel.
If a registered scanning shortcut is allocated to the start button, you can
implement shortcut scans using these settings just by pressing the
scanner start button -> "Scanning with Start Button"
Registering and editing scanning shortcuts
Multiple scanning shortcuts can be allocated to CaptureOnTouch.
1
Either click the [New shortcut] button in [Scanning shortcut], or
select the document scan and output in [Standard Scanning], and
click the [Save to Shortcut] button.
A scanning shortcut panel will be created.
52