Canon imageFORMULA P-215II User Manual page 69

Launch method setting
By default, CaptureOnTouch becomes resident in the system when you
start your computer. Clear the [Make CaptureOnTouch resident] check box
to not make CaptureOnTouch resident in the system.
Display setting for when scanner connected
Select the [Launch CaptureOnTouch when scanner is connected]
checkbox to open the main screen of CaptureOnTouch automatically
when the scanner is connected to the computer. This setting is only
enabled when CaptureOnTouch is running (or resident in the system).
Back Up / Restore
Use the [Back Up] and [Restore] buttons to back up the configuration file
(settings, registered jobs, etc.) of CaptureOnTouch and restore the
settings from the backup data.
[Back Up] button
Back up the settings of CaptureOnTouch to a backup file (*.plist). You can
store the initial settings of CaptureOnTouch by performing a backup before
you first use CaptureOnTouch.
[Restore] button
Restore the settings from the backup file.
When using multiple computers, you can back up the environmental
settings of one computer and then perform a restore on the other
computers so that all of the computers have the same settings.
Downloaded from ManualsPrinter.com Manuals
[Plugin] Tab
On the [Plugin] tab, confirm the plugins that have been added to
CaptureOnTouch.
Deleting plugins
Click the [Delete] button to delete a plugin selected in the list.
[Maintenance]Tab
On the [Maintenance] tab, configure the following settings.
[Initialize]
Return all settings to their default condition.
68