Appendix 4: Feed Roll Kits - Thermal Arc Fabricator 140 Service Manual

FABRICATOR 140, 180
.030
0.8
Size visible when
fitting the feedroll is
the groove size in use
Manual 0-4992

APPENDIX 4: FEED ROLL KITS

FEED ROLL INSTALLATION & PARTS GUIDE
Part No.
7977036 Feed Roll .023/.030" (0.6 / 0.8mm) Hard Wire
7977660 Feed Roll .035/.045" (0.9 / 1.2mm) Hard Wire
7977731 Feed Roll .030/.035" (0.8 / 0.9mm) Soft Wire
7977732 Feed Roll .030/.035" (0.8 / 0.9mm) Cored Wire
7977264 Feed Roll .040/.045" (1.0-1.2mm) Soft Wire
704277 Feed Roll .045/1/16" (1.2 / 1.6mm) Cored Wire
W7004022 Guide, Inlet, 023-035
Description
A-6
APPENDIX
January 25, 2008