Parts List; Equipment Identification; How To Use This Parts List - Thermal Arc Fabricator 140 Service Manual

PARTS LISTS
SECTION 7:

PARTS LIST

7.01 Equipment Identification

All identification numbers as described in the Introduction
chapter must be furnished when ordering parts or making
inquiries. This information is usually found on the
nameplate attached to the equipment. Be sure to include
any dash numbers following the Specification or Assembly
numbers.

7.02 How To Use This Parts List

The Parts List is a combination of an illustration and a
corresponding list of parts which contains a breakdown
of the equipment into assemblies, subassemblies, and
detail parts. Most parts of the equipment are listed except
commercially available hardware, bulk items such as wire,
cable, sleeving, tubing, etc., and permanently attached
items which are soldered, riveted, or welded to other parts.
The part descriptions may be indented to show part
relationships.
To determine the part number, description, quantity, or
application of an item, simply locate the item in question
from the illustration and refer to that item number in the
corresponding Parts List.
CATALOG NUMBERS:
W1002500
W1002600
January 25, 2008
Fabricator 140
Fabricator 180
7-1
FABRICATOR 140, 180
Manual 0-4992