Understanding The Scan Menu - Lexmark 5300 Series User Manual

3
Click Custom Settings.
4
Change the settings as needed.
Setting
Color Depth
Scan Resolution (Dots Per Inch)
Size
Select area to be scanned
Convert the image to text with OCR Convert an image to text.
Always use these settings when
scanning

Understanding the Scan menu

To use the Scan menu:
1
From the control panel, press Scan Mode.
The scan default screen appears.
2
Press or repeatedly until the scan destination you want appears.
3
If you do not want to change a setting, press Start Color or Start Black.
4
If you want to change a setting, press .
5
Press or repeatedly until the menu item you want appears, and then press
6
Press or repeatedly until the submenu item or the setting you want appears, and then press
Note: Pressing selects a setting. An * appears next to the selected setting.
7
To go into additional submenus and settings, repeat pressing
setting you want appears, and then press
8
If needed, press repeatedly to return to the previous menus and make other setting selections.
9
Press Start Color or Start Black.
Use this
Quality*
Original Size*
* Temporary setting. For information on saving temporary and other settings, see the related topic, "Saving
Settings."
Options
Select Color, Grey, or Black and White.
Select a scan resolution value from the drop-down list.
•
You can auto-crop the scanned item. Move the slider to the desired
setting.
•
You can select the area to be scanned. From the drop-down list, select
a paper source.
Select the area to be scanned by choosing a paper size from the drop-down
list.
Make your selections permanent by selecting the check box.
.
To
Adjust the quality of a scan.
Specify the size of the original document.
Scanning
or repeatedly until the submenu item or the
91
.
.