Test Page Does Not Print - Lexmark 5300 Series User Manual

Test page does not print

These are possible solutions. Try one or more of the following:
M
AKE SURE THE PRINTER IS RECEIVING POWER
If is not on, the printer may not be receiving power.
•
Press .
•
Plug the printer into a different electrical outlet.
•
If the printer is plugged into a surge protector, unplug the printer, and plug it directly into an electrical outlet.
M
AKE SURE THE STICKER AND TAPE ARE REMOVED FROM THE PRINT CARTRIDGES
1
Lift the scanner unit.
2
Remove the print cartridges from the print cartridge carrier.
3
Make sure the sticker and tape are removed from the bottom and back of the print cartridges.
M
AKE SURE THE CARTRIDGES ARE PROPERLY INSTALLED
With the front of the printer facing you, check for proper print cartridge installation. If you are using a color cartridge,
make sure it is properly installed in the right carrier. If you are using a black cartridge or photo cartridge, make sure
it is properly installed in the left carrier.
For more information, see "Installing print cartridges".
M L
AKE SURE THE EXMARK PRINTER DRIVER IS SET AS THE DEFAULT PRINTER
For more information on checking the printer default setting, see "Checking the printer status."
To test the solution, print a test page.
1
Click Programs or All Programs
2
Click Lexmark Solution Center.
3
Click the Maintenance tab.
4
Click Print a test page.
The problem may be with the cable connections. For more information, see "Cable is not connected, is loose, or is
damaged."
Lexmark 5300 Series.
Troubleshooting
140