5
Wait for the printer to finish downloading the applications list.
Note: This list is downloaded from the applications available on the computer. Make sure a photo-editing
application is installed on the computer.
6
Press the left or right arrow button until the application that you want appears, and then press OK.
7
Press
.
The scanned image is sent to the photo-editing application that you selected.
Scanning to a computer over a network
1
Make sure that:
The printer is connected to a network through a print server or through a wireless network connection.
•
The printer, the print server (if used), and the computer receiving the scanned image are all turned on.
•
The printer is configured to scan over a network.
•
2
Load an original document faceup into the Automatic Document Feeder (ADF) or facedown on the scanner glass.
Notes:
Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
•
clippings) into the ADF. Place these items on the scanner glass.
Adjust the paper guide on the ADF tray to the width of the original document.
•
When using the scanner glass, close the top cover to avoid dark edges on the scanned image.
•
3
From the printer control panel, press
4
If necessary, press the up or down arrow button until Computer is highlighted, and then press OK.
5
Press the left or right arrow button to select the computer name of the network computer where you want to
send the scanned image, and then press OK.
Notes:
You may be prompted to enter a PIN if the computer requires it. To assign a computer name and a PIN to the
•
network computer, see the Help for the printer software associated with your operating system.
If your printer has a numeric keypad, enter the PIN using the keypad, and then press OK.
•
If your printer does not have a numeric keypad, use the left or right arrow button to decrease or increase the
•
value for each digit (the default value is 0000) in the PIN, and then press OK each time you select a digit.
6
Wait until the printer has finished downloading the scan applications list.
7
Press the left or right arrow button until the application that you want appears, and then press OK.
8
Press
.
Canceling scan jobs
Using the printer control panel
To cancel a scan job started in the printer control panel, press
.
.
Scanning
92