Lexmark 4900 Series User Manual page 21

Use the
4 Automatic Document Feeder (ADF) tray
5
Automatic Document Feeder (ADF) output tray
6
Wi-Fi indicator
Note: Your printer model may not have wireless
capability and may not have this indicator.
7
Memory card slots
8 PictBridge port
9 Printer control panel
10 Paper exit tray
11 Automatic Document Feeder (ADF) paper guide Keep paper straight when feeding into the ADF.
12 Automatic Document Feeder (ADF)
13
Scanner glass
14
Top cover
To
Load original documents in the ADF. Recommended for
scanning, copying, or faxing multiple-page documents.
Note: Do not load postcards, photos, small items, or thin
media (such as magazine clippings) into the ADF. Place
these items on the scanner glass.
Hold documents as they exit from the ADF.
Check wireless status:
Off indicates that the printer is not turned on or that
•
no wireless option is installed.
Orange
•
– indicates that the printer is ready to be configured
for wireless printing
– indicates that the printer is connected for USB
printing
Orange blinking indicates that the printer is
•
configured but is unable to communicate with the
wireless network.
Green indicates that the printer is connected to a
•
wireless network.
Insert a memory card.
Connect a PictBridge-enabled digital camera or a flash
drive to the printer.
Operate the printer.
Hold paper as it exits.
Scan, copy, or fax multiple-page letter-, legal-, and
A4-size documents.
Scan and copy photos and documents.
Access the scanner glass.
Setting up the printer
21