Lexmark 4900 Series User Manual page 119

In Mac OS X version 10.4 and earlier
1
From the menu bar, click Go ª Applications.
2
From the Applications folder, double-click Internet Connect.
3
From the toolbar, click AirPort.
The SSID of the network the computer is connected to is displayed in the Network pop-up menu.
4
Write down the SSID.
Using Macintosh with a wireless access point
1
Type the IP address of the wireless access point in the address field of your Web browser and continue to Step
2.
If you do not know the IP address of the wireless access point, then do the following:
In Mac OS X version 10.5
a
From the menu bar, click
b
Click Network.
c
Click AirPort.
d
Click Advanced.
e
Click TCP/IP.
The "Router" entry is typically the wireless access point.
In Mac OS X version 10.4 and earlier
a
From the menu bar, click
b
Click Network.
c
From the Show pop-up menu, select Airport.
d
Click TCP/IP.
The "Router" entry is typically the wireless access point.
2
Type your user name and password when prompted.
3
Click OK.
4
On the main page, click Wireless or another selection where settings are stored. The SSID will be displayed.
5
Write down the SSID, security type and the WEP key/WPA passphrase (if shown).
Notes:
Make sure you copy the network information down exactly, including any capital letters.
•
Store the SSID and the WEP key or WPA passphrase in a safe place for future reference.
•
C WEP
HECK YOUR
If your wireless access point is using Wireless Equivalent Privacy (WEP) security, the WEP key should be:
Exactly 10 or 26 hexadecimal characters. Hexadecimal characters are A-F, a-f, and 0-9.
•
or
Exactly 5 or 13 ASCII characters. ASCII characters are letters, numbers, and symbols found on a keyboard. ASCII
•
characters in a WEP key are case-sensitive.
ª System Preferences.
ª System Preferences.
WPA
KEY OR PASSPHRASE
Troubleshooting
119