Setting Up The Printer; Granting Access To The Software During Installation; Setting Up The Printer As A Copier Only - Lexmark 4900 Series User Manual

Setting up the printer

Granting access to the software during installation

Third-party applications, including antivirus, security, and firewall programs may alert you about the printer software
being installed. For your printer to work properly, you must grant access to the printer software.

Setting up the printer as a copier only

Use the following instructions if you do not want to connect the printer to a computer.
Note: If you want to connect the printer to a computer, use the setup documentation and the printer software CD
that came with the printer.
1
Unpack the printer.
Note: Contents, such as the number of print cartridges, may vary by model.
1 Power cord
2 Printer software CD
3
USB cable or installation cable
Note: Your printer model may not come with a USB cable. Purchase a USB cable separately.
4 Networking Guide
Note: Your printer model may not come with this publication.
5
Quick Setup sheet
6 Print cartridges
Note: Your printer model may come with only one cartridge.
Setting up the printer
13