Automatic Line Feed (Lf); Reverse Line Feed; Set Vertical Units (259X Only) - Lexmark 258x Technical Reference

Draft document

Automatic Line Feed (LF)

Turns the automatic line feed mode On and Off.
Format ESC 5
Decimal 27 53
Hexadecimal 1B 35
USAGE NOTES
The value of n can be either of the following:
•
•
•

Reverse Line Feed

This command feeds the paper one line in the reverse direction.
Format ESC ]
Decimal 27 93
Hex 1B 5D
Caution:

Set Vertical Units (259X only)

For 259x printers only.
This command selects the line feed spacing increment for the following commands:
•
•
Format ESC [
Decimal 27 91
Hexadecimal 1B 5B
n
n
n
1 (dec) 01 (hex) = ON
0 (dec) 00 (hex) = OFF
When on, executes an automatic line feed when a carriage return is received.
This command is not recommend. Repetitive use of this command can
cause a paper jam.
Set Graphics Line Spacing (ESC 3)
Graphics Variable Line Spacing (ESC J).
\ n1 n2 m1
92 n1 0 0
5C n1 00 00
2-9
m2 m3 m4
0 m3 m4
00 m3 m4
Print Position