Understanding The Adf (Automatic Document Feed) & Scanner Glass - Lexmark T65 Series Product Study Manual

Lexmark T65x and X65x Mono Product Study Guide
Understanding the ADF (automatic document feed) & Scanner Glass
You can use the ADF or the scanner glass to scan documents.
Using the ADF
The Automatic Document Feeder (ADF) can scan multiple pages, including duplex pages. When using
the ADF:
•
Load the document into the ADF face up, short edge first.
•
Load up to 75 sheets of plain paper in the ADF input tray.
•
Scan sizes from 76.2 x 139.4 mm (3.0 x 5.5 in.) to 215.9 x 355.6 mm (8.5 x 14 in.).
•
Scan documents with mixed page sizes (letter and legal).
•
Scan media weights from 52 to 120 g/m2 (14 to 32 lb).
•
Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as
magazine clippings) into the ADF. Place these items on the scanner glass.
Using the scanner glass
The scanner glass can be used to scan or copy single pages or book pages. When using the scanner
glass:
•
Place a document facedown on the scanner glass in the upper left corner.
•
Scan or copy documents up to 215.9 x 355.6 mm (8.5 x 14 in.).
•
Copy books up to 25.3 mm (1 in.) thick.
NOTE: If there is a defect that appears on the same place on every printed page, cleaning the scanner
glass is always the first step that should be taken to eliminate the problem.
For Training Purposes Only 24
Rev 1.47
6/3/2009