7 Set the forms thickness lever to the proper
setting for the type of paper you are using.
See "Setting the forms thickness lever" on
page 44.
Continuous forms jams
1 Turn the printer Off.
2 Detach any continuous forms already printed.
3 Set the forms thickness lever to position 7.
4 Tear the continuous forms off at the
perforation line before the forms enter the
printer.
5 If using the tractor in the push position, open
the front cover. (Skip this step if you are using
the optional Tractor 2 Feeder.)
6 Open the left and right tractor doors.
7 Lift the paper away from tractor pins.
8 Carefully pull out the paper.
9 Remove the ribbon access cover to clear any
torn paper.
10 Remove any torn perforation strips or bits of
paper from the paper path.
127