Lexmark 2480 User Manual page 139

Printer problems (continued)
Problem
Paper does not feed from
the Auto Sheet Feeder.
Probable cause
The Auto Sheet Feeder
locking lever is in the
front position.
The paper select lever is
in the tractor feed
position.
The optional Auto Sheet
Feeder is not set to On in
Setup mode.
Too many sheets are in
the paper bin.
The weight of the paper
is too great.
Paper sheets seem to
hold together at the
bottom edge.
Dirty feed rollers.
135
Action
Set the Auto Sheet Feeder
locking lever to the back
position.
Set the paper select lever to
the cut sheet position.
Enter Setup mode and set the
option to On. See "Entering
Setup mode" on page 90 for
more information.
• Remove the extra sheets.
• Ensure that the stack of
paper is not more than 150
2
sheets (64 g/m ). For larger
or thicker paper, use fewer
sheets.
Remove all paper from the
paper bin and install paper
that has a lower weight. See
the optional Auto Sheet
Feeder manual for
recommended paper weights.
Remove all paper from the
paper bin and fan the top and
bottom edges with your
thumb. Then place the paper
in the paper bin.
For help, see "Cleaning the
Auto Sheet Feeder rollers" on
page 143.