Lexmark 2480 User Manual page 134

Printer problems (continued)
Problem
Incorrect number of lines
on a page.
Left margin moves to the
right during printing.
Probable cause
Application software
problem.
The stack of continuous
forms is catching on
something.
Top-Of-Form is set too low. Readjust Top-Of-Form. For help,
Printer page length is set
incorrectly.
The printhead is not
moving correctly.
Forms thickness lever is
incorrect for the type of
paper you have loaded.
Software application
problem.
130
Action
Refer to your software
application manual.
Make sure paper is free to feed
from carton and there is
nothing obstructing paper
movement (such as cables).
see "Setting Top-Of-Form" on
page 81.
Adjust page length in Setup
menu. For help, see "Using
Setup mode to change printer
settings" on pag e89.
• Check that the ribbon
cartridge and paper are
correctly installed.
• Make sure the carrier
packing tape has been
removed.
• Check to see if anything is
blocking the movement of
the carrier.
• If a paper jam has recently
occurred, turn Off the
printer and try again.
• Contact your service
representative.
Reset the forms thickness lever.
See "Setting the forms
thickness lever" on page 44.
Refer to your software
application manual.