Transmission Oil - CanyCom CM141 Operator's Manual

Transmission Oil

NOTE
• Oil to Use: Page 34.
• Oil Capacity: Page 34.
Oil Level Gauge
Upper Limit
Standard Level
Lower Limit
5331M-0507-010E
Drain Plug
5331M-0507-020E
Maintenance
Inspecting
1. Park machine on a level ground.
2. Visually inspect amount and condition of oil.
3. Check if oil level is between upper and lower
limits. Fill oil if needed.
4. Change oil if oil is too dirty.
Changing
1. Park machine on a level ground.
2. Have an appropriate oil drain pan.
3. Open rear cover.
4. Remove oil plug.
5. Remove drain plug and drain oil.
6. Put drain plug back in place.
7. Fill specified amount of correct oil into filler.
8. Put filler cap back in place.
9. Close rear cover.
-43-
5