CanyCom CM141 Operator's Manual page 35

4
• Wash cutting blade (page 58) after every use.
• Do not work on a slippery surface.
• When working in a dusty area, clean air cleaner element twice a day. Dirty air
cleaner element results in poor starting, poor performance, or short life.
• When a cutting blade is broken, replace it and the other blade with a new pair. A
broken blade causes excessive vibration, which damages machine.
• When something is tangled to cutting blade, stop engine immediately and
remove the tangled object. Such object causes excessive vibration, which
damages machine.
5321M-0403-060E
Throttle Lever
53314M-0402-170E
Operation
Cutting Blade Shield
LO
HI
1. Make sure cutting blade shields on both
sides are closed.
2. Turn throttle lever to [Hi (fast)] position to
raise engine speed.
-26-