Hoisting - CanyCom CM141 Operator's Manual

7
3. Turn throttle lever to [Low], set cutting height adjuster lever to [Transport], and drive
machine slowly forward onto loading deck.
4. Park machine according to the instructions in "Parking" (Page 24). Tie tmachine with
rope or tie-down belts and secure it onto loading deck of transporter securely.

Hoisting

• Licence or certification is required to operate a crane. Check your local
regulations.
• Use hoisting sling of sufficient strength. Always use the slings of the same
length when more than one is used.
• Pay special attention to the center of gravitiy and the balance of machine when
hoisting.
5331M-0702-010E
Transporting
1. Lift seat.
2. Attach hoisting slings to 2 lift hooks and hoist
Hooks
machine.
-66-