CanyCom CM141 Operator's Manual page 36

Cutting Height
Adjust Lever
5331M-0403-010E
Cutting Rotary
Clutch Lever
5331M-0403-030E
5331M-0403-051E
Operation
3.
4.
5.
NOTE
• When cutting with this machine for the first
time, start on a flat surface. Drive slowly
Drive Lever
and in an overlapping pattern.
• If load to cutting blade is high, drive slowly,
or cut twice.
• Safety feature: engine stops automatically if
operator leaves seat while cutting blade is
rotating.
-27-
Move cutting height adjust lever to a desired
height.
Move rotary clutch lever to [ON] to start
cutting blade.
Drive machine forward to cut.
4