CanyCom CM141 Operator's Manual page 19

2
1 Main Switch . . . . . . . . . . . . Main switch is used to start or stop engine.
2 Throttle Lever . . . . . . . . . . Throttle lever is used to control engine speed.
3 Choke Knob . . . . . . . . . . . . Pulling choke knob closes choke valve to help start engine
4 Drive Lever . . . . . . . . . . . . Drive lever is used to control the traveling direction and
5 Brake Pedal . . . . . . . . . . . . Brake pedal is used to stop machine. When brake pedal
6 Parking Brake Lock . . . . . Parking brake lock lever is used when parking machine
Lever
7 Cutting Height Adjust . . . . Cutting height adjust lever is used to adjust the cutting
Lever
8 Cutting Rotary Clutch . . . . Cutting rotary clutch lever is used to start or stop rotating
Lever
9 Fuel Gauge . . . . . . . . . . . . . Fuel gauge indicates the amount of fuel in fuel tank.
10 Differential Lock Lever . . . Differential lock lever is used to lock differential when rear
(Diff. Lock Model)
Controls and Components
in cold weather. Push knob back to open choke valve once
engine starts.
speed of machine. Machine moves forward when lever is
tilted forward and backward when lever is tilted backward.
Angle of drive lever determines the speed.
is depressed, drive lever returns to neutral position and
brake is engaged.
securely. Pulling parking lock lever while brake pedal is
depressed locks brake pedal.
height. There are 5 steps on CM141 and any height
between 0 and 80mm without steps on CM142.
cutting rotary.
wheels slip. Tilting differential lock lever to [ON] position
locks differential.
-10-