Chassis - CanyCom CM141 Operator's Manual

5

Chassis

• Perform a pre-startup inspection (PSI) before each use, a monthly inspection once a
month, and a yearly inspection once a year.
• Some maintenance procedures described below may require special knowledge
or tools and instruments. Contact your CANYCOM representative to perform such
procedures.
Item
Tires
Transmission
HST
V-belt
Brake
Parking Brake
Steering
Wheel
Rods, Links,
and Wires
Maintenance
Description
Tires shall be inflated to the specified
pressure.
Tires and wheels shall be free of crack,
damage, or uneven wear.
Wheel bolts shall not be loose or missing.
Wheel bearings do not exhibit excessive play
and no irregular noise or overheating shall
be observed.
Irregular noise or overheating shall not be
observed when moving forward or backward.
There shall not be oil leaks in or around
transmission.
HST shall perform normally.
Hydraulic fluid shall be filled to a proper
level and shall be clean and free of dirt or
contamination.
Lever shall not be loose or have excessive
play.
Belt tension shall be properly adjusted.
Belt shall be free of damage or excessive
wear.
Brake shall work properly.
Parking brake shall be able to hold the
machine on a 15-degree slope.
Turn steering wheel right and left; front
wheels shall turn accordingly.
Rods, links, and wires in linkage shall be free
of deformation or damage.
Connections shall be free of looseness,
excessive play, or missing cotter pins.
Schedule
√ √ √
√ √ √
√ √ √
√ √ √
-30-
Note
Page 44
√ √
√ √
√ √
√ √
Page 46
√ √
√ √
√ √
√ √
Page 48
√ √
√ √
√ √
√ √