Drive Train; Tires - CanyCom CM141 Operator's Manual

5

Drive Train

• Stop engine and remove ignition key before servicing drive train.
• Allow machine to cool off before servicing. Engine and its ancillaries are very
hot after operation and may pose a burn hazard.
• Dispose of drained oil properly.

Tires

• Inflate tires to the specified pressure. Under- or over-inflation causes uneven
wear or other damages to tires.
5319M-0508-010E
Front Wheel
Rear Wheel
Maintenance
1.
2.
Valve Cap
3.
4.
Tire Size
AGR 3.50-7 (2PR)
16×7.00-8 (2PR)
-42-
Park machine on a level ground.
Remove valve cap.
Check tire air pressure. If different from the
specified values, adjust pressure.
Put valve cap back in place.
Pressure KPa(kgf/cm )
2
110 (1.1)
130 (1.3)